Mitsubishi QJ71C24N - Non Procedure System Setting

9 - 28 9 - 28
MELSEC-Q
9 UTILITY PACKAGE (GX Configurator-SC)
9.4.7 Non procedure system setting
[Purpose]
For data transmission using the non procedure protocol, register system setting
values.
[Operating procedure]
• Online operation
[Monitor] screen
CH Non procedure system setting
• Offline operation
[Flash ROM setting] screen
CH Non procedure system setting
[Setting screen]
[Setting items]
Buffer memory address
Item
CH1 CH2
Reference section
Received data count designation A4H 144H
Receive complete code designation A5H 145H
Chapter 6
User frame use enable/disable designation ADH 14DH
First frame No. designation 1st to 4th AEH to B1H 14EH to 151H
Last frame No. designation 1st to 4th B2H to B5H 152H to 155H
User frame receive format designation 1st to 4th
2020
H to
2023
H
2120
H to
2123
H
Receive user frame
designation
Exclusive format-1 received data count 1st to 4th
2024
H to
2027
H
2124
H to
2127
H
CR/LF output designation B7H 157H
Output head pointer designation B8H 158H
Transmission user
frame designation
Output count designation B9
H 159H
User's Manual (Application)
Timeout at No-protocol 2014H 2114H User's Manual (Application)