Mitsubishi QJ71C24N - Checking the Function Version, Serial No., and Software Version

2 - 18 2 - 18
MELSEC-Q
2 SYSTEM CONFIGURATION AND AVAILABLE FUNCTIONS
2.8 Checking the Function Version, Serial No., and Software Version
This section provides the information on function versions, serial Nos., and software
versions of the related products that support new functions of the Q series C24 and
explains how to check them.
(1) Correspondence of related products for use additional functions of
Q series C24
Function version of the Q series C24 Version of related product
Additional function
QJ71C24N
(-R2/R4)
QJ71C24 (-R2) CPU module GX Developer
GX
Configurator-
SC
GX Works2
Simultaneous connection of GX Developer and
GOT
Function version B
RS(RTS) and ER(DTR) signal
status designation
Version 2 or
later
Support for 230400 bps
Transmission
specifications
Data transmission/ reception at
low speed (50 bps)
Function version B
Version 1.15R
or later
Clearing reception data by a dedicated
instruction
Function version B
Programmable controller CPU information clear
Function version B
or later whose first
5 digits of the serial
No. are 08032
Version 2.11M
or later
Transmission of the
programmable controller CPU
monitoring information through
combined use of the modem
function
Function version B
SW0D5C-
QSCU-E 20C
or later
Automation initialization of
modem
Communication
via modem
function
Callback
Function version B
or later whose first
5 digits of the serial
No. are 03043
Version 7 or
later
Version 1.0 or
later (Versions
prior to
SW0D5C-
QSCU-E 40E
are not
usable.)
Remote password check
Function version B
Function version A
or later whose first
5 digits of the serial
No. are 02092
Version 6 or
later
SW0D5C-
QSCU-E 20C
or later
Non procedure and non reception monitoring
time format designation
Version 2 or
later
Transmission control start/end free area
designation
Version 2 or
later
05H, 0BH, 11H, 17H Function version B
SW0D5C-
QSCU 20C or
later
04H, 0AH
Version 2 or
later
Addition of
changeable
data to the user
frame
E5
H, EBH
Function version B
or later whose first
5 digits of the serial
No. are 06062
Version 2.06G
or later
Reception according to user frames
(reception according to format 1)
Function version B
SW0D5C-
QSCU-E 20C
or later
Multiple specification of transparent codes for
transmission
Function version B
SW0D5C-
QSCU-E 20C
or later
Version 1.15R
or later
Switching the GX Developer connection mode
by switching the mode
Communication data monitoring function
Version 8 or
later
Version 2 or
later
Version 1.15R
or later
UINI instruction
Function version B
or later whose first
5 digits of the serial
No. are 06062
Specification of station No. 65 to 120 by MC
protocol (QnA compatible 4C/3C frame only)
Universal model
QCPU of function
version B or later
whose first 5 digits
of the serial No. are
09042.