9 - 18 9 - 18
MELSEC-Q
9 UTILITY PACKAGE (GX Configurator-SC)
<Flash ROM data>
(a) This means the data set in Flash ROM setting and they can be stored in any
directory separately from projects of GX Developer.
(b) Steps 4) and 5) in Figure 9.1 are performed as follows:
4) This operation can be executed from the [Flash ROM setting] screen or
[Monitor/Test] screen of the utility.
[Flash ROM setting] screen
[Load file]/[Save file]
[Monitor/Test] screen
[Load file]/[Save file]
5) This operation can be executed from the [Monitor/Test] screen of the
utility.
[Monitor/Test] screen
[Read from module]/[Write to module]
<Make text file>
(a) Clicking Make text file on the Auto refresh setting or Monitor/Test screen
creates a text file.
This feature is useful for documentation of users.
CH.2
QCPU
Q25HCPU
MODE
RUN
ERR.
USER
BAT.
BOOT
RS-232
USB
QJ71C24N
B
1)
2)
4)
B
A
A
3)
5)
GX Developer/
GX Configurator-SC
Disk
Project
Project
Personal computer
A: Intelligent function module parameters
B: Flash ROM data
C: Data created by "Make text file" and saved
A
B
Figure 9.1 Correlation chart for data created with the utility package
To Next Page
Loading...
