10 - 25 10 - 25
MELSEC-Q
10 DEDICATED INSTRUCTIONS
Error
(1) When a dedicated instruction is failed, the status display device at completion
((D)+1) turns ON and the error code is stored in the execution result ((S)+0).
In case of operation errors, Error flag (SM0) turns ON and the error code is stored
in SD0.
Refer to the following according to the error code, and check and correct the error.
<Error code>
4FFF
H or less: QCPU User's Manual
(Hardware Design, Maintenance and Inspection)
7000
H or later: Section 11.2
Program example
For the program example of the CPRTCL instruction, refer to Section 8.1.6.
To Next Page
Loading...
