Mitsubishi QJ71C24N - Page 396

App. - 23 App. - 23
MELSEC-Q
A
PPENDIXES
(2) Connection example
(Connection example 1)
• The CD terminal check setting should be set to "No check" according to the explanation in Section 3.2.1 (1).
• DC code control or DTR/DSR control becomes possible for transmission control.
(Connection example 2)
• The CD terminal check setting should be set to "No check" according to the explanation in Section 3.2.1 (1).
• DC code control or DTR/DSR control becomes possible for transmission control.