2 - 2 2 - 2
MELSEC-Q
2 SYSTEM CONFIGURATION AND AVAILABLE FUNCTIONS
Applicable CPU module
Base unit
2
CPU type CPU model
No. of modules
1
Main base unit Extension base unit
Q03UDECPU
Q04UDEHCPU
Q06UDEHCPU
Q10UDEHCPU
Q13UDEHCPU
Q20UDEHCPU
Q26UDEHCPU
Q50UDEHCPU
Universal model
QCPU
Q100UDEHCPU
Up to 64
3
Programmable
controller CPU
Safety CPU QS001CPU N/A
5
Q06CCPU-V
Q06CCPU-V-B
C Controller module
6
Q12DCCPU-V
Up to 64
4
: Applicable, : N/A
1 Limited within the range of I/O points for the CPU module.
2 Can be installed to any I/O slot of a base unit.
3 Use a QJ71C24N(-R2/R4) of function version B or later, whose serial No.
(first five digits) is 10042 or later.
4 Use a Q series C24 of function version B or later.
5 For safety CPUs, extension base units are not connectable.
6 Pre-defined protocol communication is not available for Redundant CPUs
and C Controller modules.
REMARKS
When using the Q series C24 with a C Controller module, refer to the user’s manual
for the C Controller module.
2
To Next Page
Loading...
