2 - 4 2 - 4
MELSEC-Q
2 SYSTEM CONFIGURATION AND AVAILABLE FUNCTIONS
(3) Supported software packages
(a) Software/setting & monitor tools (
1) for the programmable controller
Relation between the system containing the Q series C24 and software
package is shown in the following table.
To use the Q series C24, GX Developer or GX Works2 is required.
Software version
GX Developer GX Configurator-SC GX Works2
Single CPU system Version 7 or later
Q00J/Q00/Q01CPU
Multiple CPU system Version 8 or later
Version 1.10L or later
(Versions prior to
SW0D5C-QSCU-E 40E
are not usable.)
Single CPU system Version 4 or later
SW0D5C-QSCU-E 00A
or later
Q02/Q02H/Q06H/
Q12H/Q25HCPU
Multiple CPU system Version 6 or later
SW0D5C-QSCU-E 20C
or later
Version 1.15R or later
Single CPU system
Q02PH/Q06PHCPU
Multiple CPU system
Version 8.68W or later
Single CPU system
Q12PH/Q25PHCPU
Multiple CPU system
Version 7.10L or later
Version 1.13P or later
(Versions prior to
SW0D5C-QSCU-E 40E
are not usable.)
Q12PRH/Q25PRHCPU Redundant system Version 8.45X or later Version 1.14Q or later
Not available
Single CPU system
Q00UJ/Q00U/Q01UCPU
Multiple CPU system
Version 8.76E or later Version 2.17T or later
Single CPU system Q02U/Q03UD/Q04UDH/Q0
6UDHCPU
Multiple CPU system
Version 8.48A or later Version 2.12N or later
Single CPU system
Q10UDH/Q20UDHCPU
Multiple CPU system
Version 8.76E or later Version 2.17T or later
Single CPU system
Q13UDH/Q26UDHCPU
Multiple CPU system
Version 8.62Q or later Version 2.12N or later
Single CPU system
Q03UDE/Q04UDEH/
Q06UDEH/Q13UDEH/
Q26UDEHCPU
Multiple CPU system
Version 8.68W or later Version 2.17T or later
Single CPU system
Q10UDEH/Q20UDEHCPU
Multiple CPU system
Version 8.76E or later Version 2.17T or later
Version 1.15R or later
Single CPU system
Q50UDEH/Q100UDEHCPU
Multiple CPU system
Not available Not available Version 1.31H or later
When installing an MELSECNET/H remote I/O station Version 6 or later
SW0D5C-QSCU-E 30D
or later
Version 1.40S or later
1 For GX Developer and GX Configurator-SC versions that support the new functions of the Q
series C24, refer to Section 2.8.
(b) Communication support tools for external devices
Item Name Model Remark
MX Component SWnD5C-ACT -E
ActiveX control library.
The "n" in the model name is 0 or greater. (
1
)
1 Depending on the version of MX Component used, different versions of Q series C24 are
supported.
See the manual of MX Component for the details.
To Next Page
Loading...
