Mitsubishi S4E - Water Pump Removal

._____CD
____ .------fJJ
L __ ---- G:>
1.cylinder head 3 -S tcm seal
2·Vill v6 guid!!
Stem seal
(2) Mount valves (7), springs (15) and retainers (121.
(3)
Ir~tall valve co tters {l4} on each yalve with the
spnng compressed by mean' of the valve tifter.
Le,ve
ou t caps (13), wluch are to be put on when
instaJling the rocker shaft assembly.
Restore '0 the cylinder he.d the therrnast.!,
thermos.tat cover, noule holders, ieak·off pipes,
glow pius,s , connecticm wires . exhaust manjfold
and intake manifold .
Timing gears
Removal
(1) Remove bolts (I) and take down the fan (2).
Loosen bolt (3) securing the ,djust~lg plate to the
alternator, and take off fOJ] belt (4).
Q
~
J\ '_
' , ~ . .'
. .::.-- .
:~' t ~ ..
. -- . ~~ ..
-- - - ~:: " "./ ~4
~ . • 1 _
~
l..soh and washli!r 14 pes each.
2F Fon
Removing fan
3 -B o ft
4-fan belt
2
(2) Remove nut (5) on water puntp shaft, and nut (6)
on crankshaft. From the pump shaft, remove fan
spacer and,
by using the fan puUer (Al, draw pump
puUey (7). Draw puUey (8) from crankshaft with
the puUe r.
DISASSEMBLY AND REASSEMBLY
J
5-Nu( and w.uh.et 7-P ump pu ll .y
6-NI.It a-wj w<J$her 8-Cranksh8h pulll!v
Removing pump pl}lley and cranks hail pulley
7-Pump pulley A-Pullir
Ora-wing pump pulley off
a·Cranlt$neft pulf.y A·Puller
Removing crankshaft pullev
( 3) Remove bolt> ( 9) securing the cOvtr (lO). Remove
bolts (10) securing the timing goar case (J 2). T tlke
off the cover and gear case_
95