SAFETY INFORMATION
Please become familiar with the important safety information in this section. Improper use or
installation of the system may result in personal injury or damage to the system.
1. Read and become familiar with the manufacturer's operating manual for your machine,
including safety information, before installing or using your Control Panel.
2. A construction site can be hazardous and working around heavy construction equipment
can be dangerous. Always exercise extreme caution when on a construction site.
3. Do not let any part of the unit protrude into traffic or limit the visibility of the operator.
4. Always use eye protection when welding, cutting or grinding is being done on the machine.
5. Hydraulic lines can be under extreme pressure, even when the machine is not running.
When working on or near hydraulic lines, protect yourself at all times and wear protective
clothing.
Warning:
Do not weld near any hydraulic line or on any equipment while it is in operation. It is best to
remove any electronic gear near a welding job.
6. Any external power supply must be rated between 12 and 24 Volts DC.
Caution:
Be sure your hands are dry before handling the machine battery terminals or power cables.
© Copyright MOBA Mobile Automation Australia Pty Ltd
4
Safety Information
To Next Page