Modine Manufacturing MPR - Page 41

41MCP15-500.7
DIMENSIONS - C-CABINET SIZE UNIT BASE / ROOF CURB
2.00" DIA.
ELECTRICAL POWER
BOTTOM PIPING HOLES
2.00" DIA. GAS
FURNACE BOTTOM
PIPING HOLE
(UNITS WITH
GAS HEAT ONLY)
BASE ASSEMBLY AS
VIEWED FROM BOTTOM
LOOKING UP
RETURN/
EXHAUST AIR
OPENING
(if applicable)
SUPPLY AIR
OPENING
BASE ASSEMBLY AS
VIEWED FROM SIDE
LANDING AREA
FOR ROOF CURB
CONDENSING
SECTION SIDE
UNIT ACCESS
SIDE
1.25" DIA. FURNACE
CONDENSATE DRAIN
LINE HOLES
(UNITS WITH
CONDENSING
FURNACES ONLY)
SEE DETAIL "A" FOR
DIMENSIONS FOR UNITS
WITH HOT WATER HEAT
2.00" DIA.
ELECTRICAL POWER
BOTTOM PIPING HOLES
HOT WATER
PIPING ENTRANCE
(UNITS WITH HOT
WATER HEAT ONLY)
HOT WATER
PIPING EXIT
(UNITS WITH HOT
WATER HEAT ONLY)
DETAIL "A" FOR
UNITS WITH HOT
WATER HEAT
9.24
22.38 36.75
50.00
21.00
50.00
2.53
4.61
4.61
4.61
4.61
111.28
2.53
1.37
4.09
11.93
2.53
3.30
6.60
9.24
17.09
11.93
3.30
21.50
59.22
106.22 2.53
17.07
Figure 41.1 - Unit Base Dimensions (inches)
Figure 41.2 - Roof Curb Dimensions (inches)
SUPPLY AIR
OPENING
LOCATION
RETURN/
EXHAUST AIR
OPENING
LOCATION
(if applicable)
1.12
14.0 OR 24.0
SEE SCHEDULE
104.75
21.50 36.75 21.0019.90
101.25
INSIDE
50.0054.25
INSIDE
1.75
1.75
2.12
2.132.13
2.12
57.75
1.75
1.75
Table 41.1 - Roof Curb Weight (approx) - lbs.
Section Description Weight
Roof Curb
14” - Insulated 210
14” - Uninsulated 205
24” - Insulated 318
24” - Uninsulated 310