Example for a Text
Operator Panel
22
05/01 AWB27-1302-GB
왘 From the keys bar select the “7” key and set the
following parameters:
Key state “Pressed”.
Tab “All pages”
Command on icon “Show event list”,
Show event list.
With this setting the command “Show event list” is
executed as soon as the 7 key is pressed. The key
has the same function on all pages.
왘 Set the same parameters for the 8 key but under
“Commands” select the icon “Clear event list”.
Clear Event list
왘 Now confirm the two new key assignments by
clicking on OK.
The macro editor will close. Save the expanded
project and transfer it to the MI4
To Next Page
Loading...
