Operation
EPM2000/EPM2000e Reference Guide
21
AVERAGE BATCH SIZE
The number of samples in each of the EPM2000 channel's Average Batch Size can be any value
from 2 to 99. Note that each channel uses its own
button.
To change the quantity, press
. The LCD will indicate the current value. For example, a value
of 57 samples looks like
. Change the value directly with the numeric Entry Keys. Increment or
decrement the value by one by pressing
or , respectively.
DISPLAY BACKLIGHT
The EPM2000 LCD can be illuminated for viewing in a dim environment.
To turn the Backlight on, press
.
The Backlight should immediately turn on.
To turn the Backlight off, press
. The Backlight should immediately turn off.
DISPLAY SPEEDUP
For a detailed description of the Display Speedup feature, see Understanding the EPM2000
Speedup Feature.
To enable Display Speedup, press
. Press or until the LCD reads .
Finish the action by pressing
.
To disable Display Speedup, press
.
To set Display Speedup to Selective, press
.
FACTORY DEFAULTS
For a complete list of the EPM2000's factory defaults, please see the Specifications section.
Reprogram the EPM2000 with its factory default values by pressing and holding the
key while
turning the power off, then back on again. The instrument will immediately reset with the new
settings.
To Next Page
Loading...
Need help?
General