Features & Description
EPM2000/EPM2000e Reference Guide
10
AC In Connector
Connect only to the factory supplied, polarized AC cord. The EPM2000 will function at AC voltages
from 90 to 264 VAC at frequencies between 50 Hz and 60 Hz.
Fuseholder
Replace this fuse with only a 240 VAC 1 Amp fast-blow fuse. A convenient replacement fuse is
stored in the holder. See Maintenance, Service, & Calibration for replacement instructions.
Power Switch
Press the symbol for ON and the symbol for OFF.
IEEE-488 Connector
This connector mates with a standard IEEE-488 cable.
FRONT PANEL
Figure 9: EPM2000 Front Panel.
Channel B Controls
Channel B Controls operate the same as channel A Controls. Indicators appear for channel B
functions appear on the channel B LCD.
To Next Page
Loading...
Need help?
General