Maintenance, Service, & Calibration
EPM2000/EPM2000e Reference Guide
58
4. If the original packing material and carton are not available, obtain a corrugated cardboard
shipping carton with inside dimensions that are at least 6 in (15 cm) taller, wider, and deeper
than the EPM2000. The shipping carton must be constructed of cardboard with a minimum
375 lbs (170 kg) test strength. Cushion the instrument in the shipping carton with packing
material or urethane foam on all sides between the carton and the instrument. Allow 3 in (7.5
cm) on all sides, top, and bottom.
5. Seal the shipping carton with shipping tape or an industrial stapler.
6. Ship the instrument to the following address:
Molectron Detector, Inc.
7470 SW Bridgeport Rd.
Portland, OR 97224
Attn: RMA # (add the RMA number you received from
Molectron Customer Service)
To Next Page
Loading...