MOOV MC50JUST - System Information and Software Details

15
MESSAGE
DISPLAYED
/ FAULT
DETECTED
IMMEDIATE
AUTOMATIC
ACTION
CAUSE
CHECKS AND REMEDIES
OPTION TO
DEACTIVATE
VIA THE
MENU
« Parameters -
Alarms »
Stopping
production
Alarm
Low Salt
Yes
Salt level less than
2500 ppm (or 1200
ppm if Low Salt
equipment).
• Check the salt levels in the pool using a
recent testing kit.
• Top up with salt if necessary, so as to
obtain a salt level of 5000 ppm (or 2500
ppm for Low Salt equipment).
Yes
Insufficient amount of
water in the filtration
circuit.
• Check that the pipe at the level of the
salt sensor is completely filled with
water.
• If necessary, top up the water in the
pool.
3.8. Further information
Menu
Meaning
Soft Version
MASTER: XX.XX.XX
Control board program
Soft Version
SLAVE: XX.XX.XX
Power card program
ID Code:
XXXXXXXX
Configuration code
Serial Number:
XXXX-XXXXXX-XXX
Serial number
MAC Address:
XXXXXXXXXXXX
MAC address for Bluetooth connection
MCU Temperature:
XX°F
Internal temperature in the electronics unit