03/15
•
27
For a safe and productive operation, read the safety section thoroughly along with the controls section before start up.
All personnel (not just the operator) shall read this section and understand the operation of this machine and dangerous
areas to avoid.
NOTE: Remember, this is a dangerous piece of equipment if not maintained and operated properly.
NEW POWER UNIT BREAK-IN
The power unit on your machine was operated at the factory. This amount of time is not enough for a proper power unit
break-in. Treat the power unit as brand new and follow the power unit operator's and maintenance manual for proper break-in
procedures.
SAFETY OPERATION
To Next Page
Loading...