03/15
•
39
SAFETY OPERATION
TRANSPORTING
1� Check to make sure the clutch is disengaged.
2� Swing Discharge chute to desired position for transport.
3� Drive track machine up to low boy and align the rear of the track machine with trailer.
4� Select low speed and back machine carefully onto trailer.
5� Chain and bind machine to trailer.
6� Turn off main ignition key and remove.
7� Turn off main battery disconnect switch. (OPTIONAL)
8� Hook up the electrical connections and air brake lines.
9� Check the brakes, turn signals, and tail lights.
10� Before you leave site, spot check the area for wrenches, chain binders, and other miscellaneous tools that may have
been dropped while performing maintenance.
To Next Page
Loading...