03/15
•
51
ROUTINE MAINTENANCE
Safety
Function
The infeed acts as a safety barrier between the operator and the feed wheels during the chipping process.
Use
When feeding material into the infeed, keep all body parts outside of the infeed Bed.
Maintenance
• Keep the infeed clear of any debris (stones, glass, metal, etc.) that may damage the machine.
• Clean the infeed only when the ignition key is out, all covers are locked, and the machine is stable.
• Clear the infeed of all debris before towing.
• Insure Infeed Bed Chain is properly tightened before operation.
CAUTION
Ensure the infeed is clear of all debris before transporting the
machine. Loose debris, especially debris in the infeed can dislodge
and cause damage to vehicles behind the towed chipper.
Under no circumstances shall you hand feed this machine.
DANGER
To Next Page
Loading...