40
AIRBORNE EMISSIONS DATA
NOISE LEVEL
The sound effect level and the sound pressure level of the
woodcutting machine were measured at full throttle while all
components were in operation.
Measurements are according to the following standards and
guide-lines.
Directive 2000/14 / EC, 3. July 2000
EN ISO 3744, 1995
ISO 11201, 1995
The guaranteed sound effect level given by the manufacturer
according to the directive 2000/14 / EC is as follows:
[Make/Model Machine] with [Engine Model/Kw]: [XXX] dB (A).
The above values have the general uncertainty for the mea-
suring method and the estimated variation in a product line
for the type of machine.
The noise level is of such a nature that hearing protectors are
recom-mended during the use of the machine.
ENVIRONMENTAL DIRECTIVES
When replacing hydraulic oil or engine oil, the oil and used oil
lters and air lters must be returned to an approved receiv-
ing station.
Oil leaks should be avoided as much as possible. In the
event of oil leakage, the spilled oil must be disposed of and
returned to an ap-proved receiving station.
Worn parts must be disposed of for recycling.
When the machine is worn, it must be disposed of properly.
Hydraulic oil and engine oil must be drained and returned to
an approved receiv-ing station with oil lters and air lters.
The rest of the machine must be disposed of for recycling.
SAFETY OPERATION
To Next Page
Loading...