03/15
•
41
SAFETY OPERATION
INTENDED USE OF THE MACHINE
This wood chipper may only be used for work described in this chapter.
The manufacturer is not liable for any damage as a result of use that is not in accordance with the machine’s intended use.
This is the express responsibility of the user.
This machine has solely been designed for chipping trees and limbs of trees.
Material is chipped by putting it on the infeedtray and move towards the feedrollers at the rear of the machine.
The rotor with knives processes the material to create the desired end product
then sends it out of the machine via an spout on the upper side of the machine.
DANGER
CRUSH HAZARD: This machine is explicitly intended to be loaded
by means of an external machine; excavator, wheel loader, etc.
Manual feeding is prohibited!
The machine is suitable for reducing the following materials:
• Trees
• Logs
• Branches
• Bushes
NOTE
Processing metals will result in damage to the machine. Remove all
metal from the material to be processed before processing.
The machine is not suitable for reducing the following materials:
• Metal
• Concrete
• Stone
• Combustible, explosive or toxic substances. Or containers
To Next Page
Loading...