03/15
•
85
ROUTINE MAINTENANCE
CLEAN ENGINE AREA
CAUTION: Never clean engine with engine running�
CAUTION: A combination of dirt, oil, wood dust and chip material in the engine area presents a risk of fire�
Clean the engine and chipper area daily by blowing debris out from around power unit with compressed air.
NOTE: See power unit operations and maintenance manual for further information.
ENGINE OIL
Depending upon the expected air temperature range during the drain interval, use oil viscosity shown on the temperature
chart.
Quality engine oils are blended, so additives are neither required nor recommended.
NOTE: See power unit manual for suggested drain intervals.
To Next Page
Loading...