05/06
•
33
SAFETY OPERATION
MACHINE SHUT DOWN
Disengage the hydraulic feed system
by moving the feed control bar to the
NEUTRAL or center position.
Push the throttle control in to reduce
engine speed to idle.
When the engine and cutter drum
reach idle speed, disengage clutch.
Turn off the ignition switch, remove the
key and lock engine control panel.
Postion the Discharge Chute in line
with the back of the machine for trans-
porting.
NOTE: If your machine has a Hydraulic
Swivel Option, before shutting down
your engine, you must position the
discharge chute directly in line with the
back of the macine for transporting.
1.
2.
3.
4.
5.
4
3
2
1
To Next Page
Loading...