Mostek z80 - Page 40

3-4
TABLE 3.1 ERRORS
*** ERROR 60 INVALID SYNTAX
This message is generated if the wrong number or type of operands for a
command are entered.
*** ERROR 61 TARGET NOT FUNcrIONAL
This message is generated when the system is first initialized if a write to
the interface RAM does not function properly. This may be caused by the
lack of Target clock or power.
*** ERROR 62 TARGET OOES NOT RESPOND
This message is generated when the system is first initialized if the Target
Z80 CPU does not begin execution in the interface RAM properly. This may
be caused if the signals RESET, BUSRQ, or WAIT are active during initializa
tion.
*** ERROR 63 TARGET HANDSHAKE TlMEOlJI'
This message is generated if a Target access is attempted when the Target
Z80 CPU is not executing in the interface RAM properly. This may be
caused if the signals BUSRQ or WAIT are active during the access.
*** ERROR 64 INVALID MNEMONIC
This message is generated if the user enters a mnemonic which is not
recognized by the system. TABLE 3.2 lists the valid mnemonics.
*** ERROR 65 OPERATION NOT ALLOWED WHEN EXECUTING