78
Dispositivo comando accensione
automatica luci (fig. 4)
I
l veicolo dotato di questo dispositivo è riconoscibile
perchè, al posizionamento del commutatore a chiave
su « », entrano in funzione le luci automaticamente.
Per questa ragione l'interruttore luci è assente.
Lo spegnimento luci è subordinato al posizionamento
dell'interruttore d'accensione su « ».
Prima dell'avviamento controllare che il deviatore luci
sia posizionato su « »(luce anteriore anabbagliante).
Sono montati sul lato sinistro del manubrio.
Interruttore «A» (fig. 4)
■ Posizione « » luce anabbagliante.
■ Posizione « » luce abbagliante.
■ Posizione « » comando luce a sprazzo.
Automatic light control (fig. 4)
If the vehicles are equipped with this device, lights will
automatically turn on when the automatic light Key-
operated switch is positioned to « ».
For this reason, standard light switch is not fitted.
Position the automatic light switch to « » to turn the
lights off.
Before starting the vehicle, ensure that light dip switch
is positioned to « »(headlight to low beam).
These are mounted on the left handlebar.
Switch «A» (fig. 4)
■ Position « » dipped beam.
■ Position « » main beam.
■ Position « » flashing light control.
4
E
C
A
B
D
1
2