Motorola solutions ADVISOR TPG2200 TETRA - Removing the Battery; Installing the SIM Card

2 Press the battery downward until it clicks.
2.2.3
Removing the Battery
Prerequisites: Turn off the radio.
Procedure:
1 Pull the slot at the top of the battery to release it.
2 Lift out the battery.
2.2.4
Installing the SIM Card
Prerequisites:
Ensure that your radio is equipped with a SIM card slot.
Procedure:
1 Remove the battery cover and battery.
2 Flip open the SIM card door of the radio.
Figure 1: Opening the SIM Card Door
3 Slide up and unlock the SIM connector door (as indicated by the arrow engraved on the SIM
connector door).
4 Flip open the SIM connector door.
MN003460A01-AE
Chapter 2: Getting Started
14