Appendix B
LED Indications
LED Patterns
The Message LED indicates Call Out alert or message receiving statuses. The Status LED indicates
other general statuses. Each user profile has preprogrammed LED patterns for the following
indications:
• Call Out Alert
• Message
• Status
• Event
NOTICE: You can choose from nine LED patterns through the CPS. Contact your service
provider to customize the LED patterns for your user profiles.
Table 18: LED Status Indications
Indication Status
Solid green In use
Blinking green
• In service or idle
• Switching modes from TMO to DMO
Solid red Out of service
Blinking red
• Connecting to the network
• Switching modes from DMO to TMO
Solid orange
• Radio is powering up
• Transmit inhibit in service
• Channel busy in DMO
• Radio interference in DMO
No indication
• Radio powered down
Table 19: LED Message Indication
Indication Status
Blinking blue
• Message received or missing
• Call-Out received or missing
Table 20: Battery Charging LED Indications
Indication Status
Solid green Battery fully charged
MN003460A01-AE
LED Indications
69