Motorola solutions ADVISOR TPG2200 TETRA - Setting Audio Profiles; Tones; Keypad Tone; Setting Keypad Tone

4.6.4.1.1
Setting Audio Profiles
When and where to use: To adjust the audio parameters of the radio in its current operating
environment.
Procedure:
1 From the home screen, press the Menu key.
2 Select Setup → Audio → Audio Profile.
3 Select a required profile.
4.6.5
Tones
This field allows you to activate or deactivate the tones set.
NOTICE: The radio has two tone packs: Classic Tones (default) and New Tones. Your service
provider decides which tone pack is enabled.
4.6.5.1
Keypad Tone
You can activate/deactivate keypad tone at every key press.
4.6.5.1.1
Setting Keypad Tone
Procedure:
1 From the home screen, press the Menu key.
2 Select Setup → Tones → Keypad Tone.
3 Select one of the following options:
• On – Activates keypad tone.
• Off – Deactivate keypad tone.
4.6.5.2
All Tones
You can activate/deactivate all tones.
4.6.5.2.1
Setting All Tones
Procedure:
1 From the home screen, press the Menu key.
2 Select Setup → Tones → All Tones.
3 Select one of the following options:
• On – Activates all the tones.
• Off – Deactivate all the tones.
MN003460A01-AE
Chapter 4: Main Menu
46