4.6.1.1
Setting Default Vibrate
Procedure:
1 From the home screen, press the Menu key.
2 Select Setup → Vibrate.
3 Select one of the following options:
• Vibe then Ring
• Vibe Only
• Ring Only
4.6.2
Set Volume
This menu item allows you to adjust the tone volumes.
4.6.2.1
Setting Volume
Procedure:
1 From the home screen, press the Menu key.
2 Select Setup → Set Volume.
3 Press Select key to change the value.
4.6.3
Language
This sub-menu allows you to change the language of the radio.
4.6.3.1
Setting Language
Prerequisites: The list of available languages is set by service provider.
Procedure:
1 From the home screen, press the Menu/OK key.
2 Select Setup → Language.
3 Select desired language.
4.6.4
Audio
This menu item allows you to adjust your radio audio settings.
4.6.4.1
Audio Profiles
Your service provider can configure a maximum of four audio profiles.
For a detailed description of a specific audio profile, contact your service provider.
MN003460A01-AE
Chapter 4: Main Menu
45
To Next Page
Loading...