If the radio is connected to the Home Station, Man Down pre-alert and alert are not triggered.
For easier localization of the radio, visual and audible indications are started until they are deactivated.
To exit Man Down, exit the Emergency Mode by pressing and holding the Exit soft key.
CAUTION: Use only Motorola Solutions predefined tones when Man Down is activated.
4.4.1
Setting Man Down
Procedure:
1 From the home screen, press the Menu key.
2 Select Man Down.
3 Select one of the following options:
• On – Activates the feature.
• Off – Deactivates the feature.
4.5
Security
This sub-menu stores all your security settings.
4.5.1
PIN Protect
This feature allows you to enable/disable PIN code authentication at the next power on. This code
protects your radio against unauthorized use.
NOTICE: If the radio uses a BSI PIN code and you are unable to unlock the radio, you cannot
take any action.
4.5.1.1
Protecting the Radio with a PIN Code
Procedure:
1 Select On.
2 Enter the PIN code.
NOTICE: To increase security, set your own PIN code. By default the PIN code are all
zeros (depending on the length of the PIN code). For radios with general PIN
authentication, the PIN length is a fixed 4-digit code. For radios with BSI PIN
authentication, the PIN length is configurable by your service provider up to a maximum
of 8-digit code.
Postrequisites: Each time you turn on the terminal, PIN code is required.
MN003460A01-AE
Chapter 4: Main Menu
39
To Next Page
Loading...