2 Select Messages → Send Status.
4.3.6.2
Sending Status Messages
You can send status messages to either a selected talkgroup or a programmed private number. Only
one option can be enabled at a time.
Prerequisites:
• If sending statuses to talkgroups is enabled, switch to the talkgroup to which you want to send a
status message.
• If sending statuses to private numbers is enabled, no action is needed. The private number is set up
by your service provider.
Procedure:
1 From the home screen, press the Menu key.
2 Select Messages → Send Status.
3 Highlight the required status message and do one of the following:
• Press Select.
• Press the Send key.
4.3.7
Call-Out Availability
This menu item enables or disables the Call-Out availability.
NOTICE: This feature is only available when enabled by your service provider.
4.3.7.1
Setting Call-Out Availability
Procedure:
1 From the home screen, press the Menu key.
2 Select Messages → Call-Out Availability.
3 Select one of the following options:
• Available
• Not available
4.4
Man Down
NOTICE: This feature is a selling feature.
Man Down alerts when no movement is detected for a predefined time interval.
If this condition is met, the radio alerts you with a Man Down pre-alert. If you do not disable the pre-
alert condition by moving the radio, the radio switches to the Emergency Operation.
IMPORTANT: If you receive a call out while pre-alert condition is active, exit from call out to
Home screen before disabling the Man Down pre-alert condition.
MN003460A01-AE
Chapter 4: Main Menu
38
To Next Page
Loading...