4.5.1.2
Changing PIN Codes
NOTICE: This feature is only available when enabled by your service provider.
Procedure:
1 Select Security → Change Code.
2 Radio prompts for the Old Code.
NOTICE: By default the PIN code are all zeros (depending on the length of the PIN
code). For radios with general PIN authentication, the PIN length is a fixed 4-digit code.
For radios with BSI PIN authentication, the PIN length is configurable by your service
provider up to a maximum of 8-digit code.
3 If the entered code matches the old code, radio prompts for the new code twice.
Your radio displays Code Accepted.
4.5.2
Keypad Lock Feature
The keypad lock feature allows you to lock the keypad to prevent pressing a key accidentally.
NOTICE: Additionally, from the radio menu, you can invoke the keypad lock (not the unlock) by
selecting MENU → Security → Keylock Setup → Lock Keypad.
4.5.2.1
Setting Automatic Keylock Delay
Procedure:
1 From the home screen, press the Menu key.
2 Select Security → Keylock Setup → Delay.
3 Press Select to change the minutes and press Done.
4.5.2.2
Setting Keylock on Startup
Procedure:
1 From the home screen, press the Menu key.
2 Select Security → Keylock Setup → Start Locked.
3 Select On or Off.
4.5.3
Air Encryption
NOTICE: This feature is a selling feature.
Air Encryption is a feature that enables encryption of entire communication between the radio and
infrastructure, which results in increased security of calls, messages, and data.
MN003460A01-AE
Chapter 4: Main Menu
40
To Next Page
Loading...