Annotation Description
• Increasing or decreasing the volume
• Activating the assigned One-Touch Button feature
7 USB Connector
The USB Type-C
™
connector supports charging and programming.
NOTICE: When an active KVL device is connected to radio using the USB
connector, the radio draws current consumption from the KVL device and
start charging.
8 LED Coverage Indicator
• Shows the coverage status while transmitting and receiving over the network.
• Shows the battery status when the radio is charging.
9 Wrist Strap Holes
10 Menu button
• Press and hold to display idle screen.
• From the home screen, press to enter the main menu.
• Used to enter context-sensitive menus.
• Used as Right Navigation button for selected menu items.
11 Speaker
12 Input/Output Connector
Provides enhanced coverage when the radio is docked on the Home Station.
13 Battery Cover Lock key
• Slide to the left to unlock the battery cover.
• Slide to the right to lock the battery cover.
14 Nameplate
2.4
Powering On the Radio
Procedure:
Press and hold On button until the status LED light up.
Your radio performs a self-check and registration routine.
After successful registration, your radio is in service.
2.5
PIN Code Authentication
If pre-set by your service provider, the radio has active PIN Code Authentication, which helps you
increase security and protect your radio against unauthorized use.
The BSI PIN code is read from the SIM card and cannot be changed or disabled. However, the general
PIN code read from the codeplug configuration can be changed and disabled using radio MMI or
codeplug. If the radio is locked, no activities are allowed on the radio.
You are asked to enter the PIN code each time you turn on the radio.
MN003460A01-AE
Chapter 2: Getting Started
20
To Next Page
Loading...