Motorola solutions APX 8000 - Viewing and Clearing the Bluetooth Device Information; Pairing with LEX Handheld

• The display shows <Device Friendly Name> pair failed (if the PIN numbers are
different).
• <Device Friendly Name> connect failed (if the connection fails).
The display returns to Available Dev screen.
7.23.3
Viewing and Clearing the Bluetooth Device Information
Procedure:
1
or to BT. Press the Menu Select button directly below BT to access the Bluetooth feature
screen.
2 or to Devices.
Once the display highlights the Devices, the display shows XX connected alternates with XX
paired.
3 Press the Menu Select button directly below Sel.
4 If there are devices being paired or connected,
or along the list of <Device Friendly
Name> to see the status of each device.
If there are no active Bluetooth devices being paired or connected, the display shows No
devices.
5 Perform one of the following actions:
• To clear the device from the list,
or to the required device, press the Menu Select
button directly below Clr.
• To exit from this function, press the Menu Select button directly below Back to return to the
previous screen without deleting the device name.
If Clr is selected, the display shows <Device Friendly Name> clear?.
6 Press the Menu Select button directly below Yes or No to proceed delete the device or to exit
this function and return to previous screen.
If the device is deleted successfully, the display shows <Device Friendly Name> cleared to
indicate clearing is successful.
If the device is not deleted successfully, you hear the radio sounds a short, low-pitched tone. The
display shows <Device Friendly Name> clear failed. The display returns to previous screen.
Postrequisites:
NOTE: If Re-Pair Timer is set to infinite and you clear keys on the radio, you must clear keys on
all previously paired devices as well. (Please see your Accessories manual for further details.)
7.23.4
Pairing with LEX Handheld
Prerequisites: Ensure that Bluetooth feature of your radio is on and the Bluetooth tones are enabled.
Procedure:
1 Turn on the handheld and activate the Bluetooth feature.
MN001424A01-AW
Chapter 7 : Advanced Features
105