• Talkgroup Scan List
• Trunking Priority Monitor Scan List
Refer to a qualified radio technician for the maximum number of Scan Lists to be programmed in your
radio.
7.5.1
Intelligent Priority Scan
This feature allows you to add or delete conventional channels and trunking talkgroups from multiple
systems into the priority scan lists.
When the radio locks onto a channel in the Intelligent Priority Scan list, the radio scans for higher
priority member within the same Trunking or Conventional system.
7.5.2
Viewing a Scan List
Procedure:
1
or to ScnL and press the Menu Select button directly below ScnL .
2 or to view the members on the list.
3 Press to exit the current display and return to the Home screen.
7.5.3
Editing the Scan List
When and where to use: This feature allows you to change scan list members and priorities.
Procedure:
1 Perform one of the following actions:
• Long press the preprogrammed Scan List Programming button (side button).
•
or to ScnL then press the Menu Select button directly below ScnL .
The display shows the lists that can be changed.
2 or to the entry you want to edit.
3 Perform one of the following actions:
• Press the Menu Select button directly below Sel to add and/or change the priority of the
currently displayed channel in the scan list.
• Press the Menu Select button directly below Del to delete the currently displayed channel
from the scan list.
• Press the Menu Select button directly below Rcl to view the next member of the scan list.
4 Perform one of the following actions to select another channel that you want to add or delete
then repeat step 3. Otherwise, proceed to the next step.
•
or to the desired channel.
• Use the 16-Position Select knob to select the channel.
5 Perform one of the following actions:
• Move the Scan List Programming switch out of programming position.
MN001424A01-AW
Chapter 7 : Advanced Features
58
To Next Page
Loading...
Need help?
General
