c. Press the Menu Select button directly below Sel to select the required radio profile, or press
the Menu Select button directly below Exit to exit the screen without making any changes.
The radio returns to the Home screen. The profile name on the Home screen indicates the
current selected radio profile.
• Selecting a radio profile using the radio menu:
a.
or to Prfl and press the Menu Select button directly below Prfl to access the
Profiles feature screen.
b. or to scroll through the menu selections.
c. Press the Menu Select button directly below Sel to select the required radio profile, or press
the Menu Select button directly below Exit to exit the screen without making any changes.
The radio returns to the Home screen. The profile name on the Home screen indicates the
current selected radio profile.
7.28.4.1
Selecting an Enhanced Zone Bank
When and where to use: This feature is created in order to allow users to communicate in more
zones. An Enhanced Zone Bank (EZB) consists of three zones. This also means each icon A, B, C, ...
or Y consist of three zones. You can use the preprogrammed 3-position A-B-C switch to select the
first, second or third zone in an EZB.
This feature allows user to navigate from up to 75 zones in 25 EZBs.
NOTE: The Zone Select feature must to be preprogrammed to the 3-position A-B-C switch,
while the Enhanced Zone Bank feature must be preprogrammed to any side button or Top
(Orange) button before you can use this feature.
Procedure:
1 Press the preprogrammed EZB Up or EZB Down button to scroll the EZB up or down or press
and hold the preprogrammed EZB Up or EZB Down button to fast scroll the EZB up or down.
2 Turn the 3-Position A/B/C Switch to select the first, second or third zone in the selected EZB.
7.28.5
Enabling and Disabling the Radio Alias
This feature only supports Model 3.5 and Model 2.5.
This feature allows you to display or hide the radio alias (name).
Procedure:
Press the MyID menu item.
The display shows momentary Radio ID off, and the radio alias disappears from the Home screen
or the display shows momentary Radio ID on, and the radio alias appears on the Home screen.
7.28.6
Controlling the Display Backlight
You can enable or disable the radio display backlight as needed, if poor light conditions make the
display or keypad difficult to read.
MN001424A01-AW
Chapter 7 : Advanced Features
116
To Next Page
Loading...
Need help?
General
