2 Press the Menu Select button directly below Clck.
The display shows the current setting of the radio.
3 Press the Menu Select button directly below Edit.
The first item blinks.
4 Perform one of the following actions:
•
or to change the selected item.
• or one or more times to move to an item you wish to change. or to change the
selected item.
• Press the Menu Select button directly below Exit to exit the screen without making any
changes and return to the Home screen.
5 Perform one of the following actions:
• Press the Menu Select button directly below Ok once you have finished to save your
changes and return to the Home screen.
• Press the Menu Select button directly below Cncl to discard all changes and return to the
Home screen.
Press
at any time to return to the Home screen without saving your changes.
NOTE: If a call arrives while the radio is in the clock-setting menu, the radio exits clock
setting and displays the call information. Any changes made before the call is not saved.
7.28.12
Conventional Squelch Operation
This feature filters out unwanted calls with low signal strength or channels that have a higher than
normal background noise.
Analog Options
Tone Private Line, Digital Private-Line, and carrier squelch is available and programmed per channel.
Option Result
Carrier squelch You hear all traffic on a channel.
Tone Private Line or Digital Private-Line The radio responds only to your messages.
Digital Options
One or more of the following options can be programmed in your radio. For more information, contact
your system administrator.
Option Result
Digital Carrier-Operated Squelch You hear all digital traffic.
Normal Squelch You hear any digital traffic having the correct
network access code.
Selective Switch You hear any digital traffic having the correct
network access code and correct talkgroup.
MN001424A01-AW
Chapter 7 : Advanced Features
119
To Next Page
Loading...
Need help?
General
