Motorola solutions APX 8000 User Manual

• Phone Call
• Private Call
• Selective Call
• Call Alert
Each entry within Contacts contains the following information:
• Call Alias (Name)
• Call ID (Number)
• Call Type (Icon)
• WACN ID (ASTRO 25 Trunking IDs only)
• System ID
Your radio must be programmed to allow you to add, edit, or delete the contact entries.
Your radio also supports a maximum of 50 call lists. Each list can store up to 100 IDs.
NOTE: Your radio is programmed with a few contacts per Call Lists. Check with your dealer or
system administrator for more information.
7.4.1
Making a Private Call from Contacts
Prerequisites: Your radio must be preprogrammed to allow you to use this feature.
Procedure:
1 or to Cnts and press the Menu Select button directly below Cnts.
The entries are alphabetically sorted.
2 or to the required subscriber alias.
3 Press the Menu Select button directly below Optn and proceed to the next step.
4
or to Call and press the Menu Select button directly below Sel.
5 or to select the call type.
6 Hold the radio vertically 1 to 2 inches (2.5 to 5.0 cm) from your mouth.
7 Press the PTT button to initiate the call.
During the call, the display shows the subscriber alias.
8 Press and hold the PTT button to talk. Release the PTT button to listen.
The LED lights up solid red when the PTT button is pressed.
If there is no voice activity for a preprogrammed period, the call ends.
If the call reaches the maximum ring time, the call ends.
7.4.2
Adding a Contact to a Call List
Procedure:
1 or to Cnts and press the Menu Select button directly below Cnts .
The entries are alphabetically sorted.
MN001424A01-AW
Chapter 7 : Advanced Features
56

Motorola solutions APX 8000 Specifications

General

Brand	Motorola solutions
Model	APX 8000
Category	Two-Way Radio
Language	English