• If the power-up test is successful, you see a splash screen on the radio display, followed by
the Home screen and the Codeplug Alias.
• If the power-up test is unsuccessful, you see Error XX/YY (XX/YY is an alphanumeric
code).
NOTE:
If the radio fails to power-up after repeating a few times, record the Error XX/YY code
and contact your dealer.
Codeplug Alias feature is enabled through Customer Programming Software (CPS)
configuration to display the codeplug alias as a temporary text during power on.
2 To turn off the radio, rotate the On/Off/Volume Control Knob counterclockwise until you hear a
click.
2.7
Adjusting the Volume
Procedure:
1 To increase the volume, rotate the On/Off/Volume Control Knob clockwise.
2 To decrease the volume, rotate the knob counterclockwise.
MN001424A01-AW
Chapter 2 : Getting Started
19
To Next Page
Loading...
Need help?
General
