Motorola AP-7131 - Page 110

AP-7131 Access Point Product Reference Guide
4-28
SNMP v1/v2c community definitions allow read-only or read/write access to access point
management information. The SNMP community includes users whose IP addresses are
specified on the SNMP Access Control screen.
A read-only community string allows a remote device to retrieve information, while a read/
write community string allows a remote device to modify settings. Motorola recommends
considering adding a community definition using a site-appropriate name and access level.
Set up a read/write definition (at a minimum) to facilitate full access by the access point
administrator.
2. Configure the SNMP v1/v2 Configuration field (if SNMP v1/v2 is used) to add or delete
community definitions, name the community, specify the OID and define community access.
Add Click Add to create a new SNMP v1/v2c community definition.
Delete Select Delete to remove a SNMP v1/v2c community definition.