Motorola AP-7131 - Configuring Bandwidth Management Settings

AP-7131 Access Point Product Reference Guide
5-66
8. Use the Primary WLAN drop-down menu to select a WLAN from those WLANs sharing the
same BSSID. The selected WLAN is the primary WLAN for the specified BSSID.
9. Click Apply to save any changes to the Radio Settings and Advanced Settings screens.
Navigating away from the screen without clicking Apply results in changes to the screens
being lost.
10. Click Undo Changes (if necessary) to undo any changes made to the screen and its sub-
screens. Undo Changes reverts the settings to the last saved configuration.
11. Click Logout to securely exit the Access Point applet. A prompt displays confirming the
logout before the applet is closed.
5.3.3 Configuring Bandwidth Management Settings
The access point can be configured to grant individual WLAN’s network bandwidth priority levels. Use
the Bandwidth Management screen to control the network bandwidth allotted to individual
WLANs. Define a weighted scheme as needed when WLAN traffic supporting a specific network
segment becomes critical on either of the access point’s 802.11b/g/n or 802.11a/n radios. Bandwidth
management is configured on a per-WLAN basis for each access point radio. With this new
segregated radio approach, bandwidth management can be configured uniquely for individual
WLANs on different access point radios.
WLAN Lists the WLAN names available to the 802.11a/n or 802.11b/g/n
radio that can be assigned to a BSSID.
BSSID Assign a BSSID value of 1 through 4 to a WLAN in order to map the
WLAN to a specific BSSID.
BC/MC Cipher A read only field displaying the downgraded BC/MC (Broadcast/
Multicast) cipher for a WLAN based on the BSSID and VLAN ID to
which it has been mapped.
Status Displays the following color coded status:
Red - Error (Invalid Configuration)
Yellow - Warning (Broadcast Downgrade)
Green - Good (Configuration is OK)
Message Displays the verbal status of the WLAN and BSSID assignments. If
the Status column displays green, the Message will typically be
Configuration is OK. If yellow, a description of invalid
configuration displays.