AP-7131 Access Point Product Reference Guide
7-32
7.6 Viewing the Mesh Statistics Summary
The access point has the capability of detecting and displaying the properties of other access points
in mesh network (either base bridges or client bridges) mode. This information is used to create a list
of known wireless bridges.
To view detected mesh network statistics:
1. Select Status and Statistics -> Mesh Stats from the access point menu tree.
The Mesh Statistics Summary screen displays the following information:
Conn Type Displays whether the bridge has been defined as a base bridge or
a client bridge. For information on defining configuring the access
point as either a base or client bridge, see Configuring Mesh
Networking Support on page 9-6.
To Next Page
Loading...
