AP-7131 Access Point Product Reference Guide
5-30
5.3.1 Creating/Editing Individual WLANs
If the WLANs displayed within the Wireless Configuration screen do not satisfy your network
requirements, you can either create a new WLAN or edit the properties of an existing WLAN.
Use the New WLAN and Edit WLAN screens as required to create/modify a WLAN. To create a new
WLAN or edit the properties of an existing WLAN:
1. Select Network Configuration -> Wireless from the access point menu tree.
The Wireless Configuration screen displays.
2. Click the Create button to configure a new WLAN, or highlight a WLAN and click the Edit
button to modify an existing WLAN. Either the New WLAN or Edit WLAN screen displays.
NOTE Before editing the properties of an existing WLAN, ensure it is not being
used by an access point radio, or is a WLAN that is needed in its current
configuration. Once updated, the previous configuration is not available
unless saved.
To Next Page
Loading...
