Getting Started
The access point should be installed in an area tested for radio coverage using one of the site survey
tools available to the field service technician. Once an installation site has been identified, the
installer should carefully follow the hardware precautions, requirements, mounting guidelines and
power options outlined in Hardware Installation.
See the following sections for more details:
• Installing the Access Point
• Configuration Options
• Basic Device Configuration
3.1 Installing the Access Point
Make the required cable and power connections before mounting the access point in its final
operating position. Test the access point with an associated MU before mounting and securing the
access point. Carefully follow the mounting instructions in one of the following sections to ensure the
AP-7131 access point is installed correctly:
To Next Page
Loading...
Need help?
General
