Motorola AP-7131 - Network WAN NAT Commands

AP-7131 Access Point Product Reference Guide8-42
8.3.2.1 Network WAN NAT Commands
AP7131>admin(network.wan.nat)>
Description:
Displays the NAT submenu. The items available under this command are shown below.
For an overview of the NAT configuration options available using the applet (GUI), see
Configuring Network Address Translation (NAT) Settings on page 5-21.
show Displays the access point’s current NAT parameters for the specified index.
set Defines the access point NAT settings.
add Adds NAT entries.
delete Deletes NAT entries.
list Lists NAT entries.
.. Goes to the parent menu.
/ Goes to the root menu.
save Saves the configuration to system flash.
quit Quits the CLI.