AP-7131 Access Point Product Reference Guide
B-6
If the DHCP Server is configured for options 186 and 66 (to assign TFTP Server IP addresses) the
access point uses the IP address configured for option 186. Similarly, if the DHCP Server is configured
for options 187 and 67 (for the firmware file) the access point uses the file name configured for option
187. If the DHCP Server is configured for embedded and global options, the embedded options take
precedence.
B.1.2 Linux - BootP Server Configuration
See the following sections for information on these BootP server configurations in the Linux
environment:
• BootP Options
• BootP Priorities
--------------------------------------------------------------------------------------------
To Next Page
Loading...
