Network Management
5-35
security requirements of the WLAN. Once new policies are defined, they are available within the
New WLAN or Edit WLAN screens and can be mapped to any WLAN. A single security policy can
be used by more than one WLAN if its logical to do so. For example, there may be two or more WLANs
within close proximity of each other requiring the same data protection scheme.
To create a new security policy or modify an existing policy:
1. Select Network Configuration -> Wireless -> Security from the access point menu tree.
The Security Configuration screen appears with existing policies and their attributes
displayed.
NOTE When the access point is first launched, a single security policy (default)
is available and mapped to WLAN 1. It is anticipated numerous additional
security policies will be created as the list of WLANs grows.
To Next Page
Loading...
