AP-7131 Access Point Product Reference Guide
5-56
2. Configure the Properties field to assign a name and placement designation for the radio.
Placement Use the Placement drop-down menu to specify whether the radio
is located outdoors or indoors. Default placement depends on the
country of operation selected for the access point.
MAC Address The access point, like other Ethernet devices, has a unique,
hardware encoded Media Access Control (MAC) or IEEE address.
MAC addresses determine the device sending or receiving data. A
MAC address is a 48-bit number written as six hexadecimal bytes
separated by colons. For example: 00:A0:F8:24:9A:C8. For
additional information on access point MAC address assignments,
see AP-7131 MAC Address Assignment on page 1-26.
Radio Type The Radio Type parameter simply displays the radio type as
802.11a/n or 802.11b/g/n. This field is read only and always
displays the radio type selected from the access point menu tree
under the Radio Configuration item.
To Next Page
Loading...
