Motorola AP-7131 - Page 368

AP-7131 Access Point Product Reference Guide8-40
AP7131>admin(network.wan)> show
Description:
Displays the access point WAN port parameters.
Syntax:
Example:
admin(network.wan)>show
Status : enable
Primary DNS Server : 0.0.0.0
Secondary DNS Server : 0.0.0.0
Auto-negotiation : disable
Speed : 100M
Duplex : full
WAN IP 2 : disable
WAN IP 3 : disable
WAN IP 4 : disable
WAN IP 5 : disable
WAN IP 6 : disable
WAN IP 7 : disable
WAN IP 8 : disable
PPPoE Mode : enable
PPPoE User Name : JohnDoe
PPPoE Password : *******
PPPoE keepalive mode : enable
PPPoE Idle Time : 600
PPPoE Authentication Type : chap
PPPoE State
admin(network.wan)>
For an overview of the WAN configuration options available using the applet (GUI), see
Configuring WAN Settings on page 5-16.
show Shows the general IP parameters for the WAN port along with settings for the WAN interface..