8-47
AP7131>admin(network.wan.nat)> list
Description:
Lists access point NAT entries for the specified index.
Syntax:
Example:
admin(network.wan.nat)>list 1
-----------------------------------------------------------------------------
index name Transport start port end port internal ip translation
-----------------------------------------------------------------------------
1 special tcp 20 21 192.168.42.16 21
Related Commands:
For an overview of the NAT options available using the applet (GUI), see Configuring Network Address Translation (NAT) Settings on
page 5-21.
list <idx> Lists the inbound NAT entries associated with the WAN index (1-8).
delete Deletes inbound NAT entries from the list.
add Adds entries to the list of inbound NAT entries.
To Next Page
Loading...
