Motorola AP-7131 - Page 422

AP-7131 Access Point Product Reference Guide8-94
AP7131>admin(network.wireless.radio)> show
Description:
Displays the access point’s current radio configuration.
Syntax:
Example:
admin(network.wireless.radio)>show
Radio Configuration
Radio 1
Name : Radio 1
Radio Mode : enable
RF Band of Operation : 802.11n(2.4 GHz)
Wireless AP Configuration:
Base Bridge Mode : enable
Max Wireless AP Clients : 6
Client Bridge Mode : disable
Clitn Bridge WLAN : WLAN1
Mesh Connection Timeout : enable
Radio 2
Name : Radio 2
Radio Mode : enable
RF Band of Operation : 802.11n(5 GHz)
Wireless Mesh Configuration:
Base Bridge Mode : enable
Max Wireless AP Clients : 5
Client Bridge Mode : disable
Client Bridge WLAN : WLAN1
Mesh Connection Timeout : enable
Dot11 Auth Algorithm : open-system-only
For information on configuring the Radio Configuration options available to the access point using the applet (GUI), see Setting the
WLAN’s Radio Configuration on page 5-51.
show Displays the access point’s current radio configuration.